*NEW* High Ohm 8 Wrap Alien (29ga - 3.5mm) .35Ω
(29ga - 3.5mm) (.35Ω)
(Now Fused with 40g)
---
Our High Ohm 8 Wrap Alien is designed to offer exquisite flavor and rowdy performance on :
-Regulated
-Unregulated Series
-Series
-Stacks
---
Specs:
3x29/40CCN80
3.5mm. 8 wraps. .35Ω
---
The high-gauge and high-resistance triple-core Alien Clapton features eight wraps and a 3.5mm Inner Diameter. The wider surface area / larger size of the build, combined with a flawless Alien Clapton, creates supreme flavor, large clouds, fast ramp-up, fast saturation/wicking, minimal mass (especially compared to the size of the coil), extended battery life, and longevity of the build. They must be handled with care and never prefired on a stack. Regulated only.
---
-Do not scrape.
-Do not force or overstuff the cotton
-We STRONGLY RECOMMEND you pre-fire High Ohm 8 Wrap Aliens on a REGULATED DEVICE, starting at low wattage like 20, then slowly working your way up to the wattage you will use them at.
PRE-FIRE:
-Start at low watts and remove hotspots as you work your way up to around 100w+
-Do not lean on the fire button when pre-firing.
-Once installed, switch your atomizer over to your series device
-Double-check the coils are firing evenly from the inside out and there are no hot spots
-CAREFULLY install your cotton so you don't create new hot spots
---
- Crafted from the highest quality wire on the market
-
Packaged by the set (pair of 2)
- Series Coils come stock with a 3.5mm Inner Diameter & 8 wraps
- Thoroughly cleaned in an ultrasonic cleaner & inspected before shipment
- Handcrafted in the USA, made to order
- Coil resistance (Ω) is for the pair of coils after they have been pre-fired
Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads
Coil resistance is per set after pre-fire
Coil Clout products are intended for advanced users who are familiar with Ohms Law & battery safety
Original Build Concept by @blueeyedgoon83
BY PURCHASING THIS ITEM(S), YOU AGREE THAT COIL CLOUT AND THE MANUFACTURER OF THE PRODUCT(S) ARE NOT LIABLE FOR ANY DAMAGE OR HARM THAT MAY BE CAUSED FROM THE USE OR MISUSE OF THE PRODUCT(S). ALL COIL CLOUT PRODUCTS ARE INTENDED FOR THOSE WITH ADVANCED KNOWLEDGE OF REBUILDING, OHMS LAW, BATTERY SAFETY, ETC. ALL SALES ARE FINAL. NO RETURNS OR REFUNDS WILL BE ACCEPTED.
